欢迎访问本网站,我们是专业的管道增压泵供货商
联系方式
  • 电话:0312-3426976
  • 联系人:徐经理
  • 手机:13932271419
  • 业务QQ:632469545
  • 地址:河北安国市石佛镇路景工业园区景旺路8号

百度告诉你管道泵在安装的时候应该注意哪里

date.png 2019-11-18 16:47:25

1、设備转轴的径嚮跳動應≤0.04毫米,轴嚮竄動量不允许大于0.1毫米;

2、设備的密封部位在裝置時應堅持清洁,密封零件應停止清洗,密封端麵完好無损,避免雜質和灰塵帶入密封部位;

3、在裝置過程中嚴禁碰擊、敲打,以免使機械密封摩擦付破损而密封失效;

4、裝置時在與密封相接觸的外錶應塗一層清洁的機械油,以便能顺利裝置;

5、裝置静環壓蓋時,拧緊螺丝必需受力平均,保證静環端麵與轴心线的垂直请求;

6、裝置後用手推進動環,能使動環在轴上靈敏挪動,并有一定弹性;

7、裝置後用手盤動转轴、转轴應無轻重覺得;

8、设備在運转前必需充溢介質,以避免幹摩擦而使密封失效;

1. The radial runout of the rotating shaft of the equipment shall be ≤ 0.04mm, and the axial displacement shall not be greater than 0.1mm;


2. The sealing part of the equipment shall be kept clean during the installation. The sealing parts shall be stopped from cleaning. The sealing end face shall be intact to avoid impurities and dust from entering the sealing part;


3. It is strictly prohibited to bump or knock during the process of the device, so as to avoid the mechanical seal friction pair damage and seal failure;


4. When the device is in contact with the seal, a layer of clean mechanical oil shall be coated on the surface, so that the device can be smoothly installed;


5. When the static ring gland of the device is tightened, the force must be average to ensure the vertical request between the end face of the static ring and the axis;


6. After the device, push the moving ring by hand, which can make the moving ring move sensitively on the shaft and have certain elasticity;


7. After the device is installed, the rotating shaft shall be rotated by hand, which shall be of no importance;


8. The equipment must be filled with medium before operation to avoid seal failure due to dry friction;



联系方式

ico04
联系人

徐经理

ico01
电话

0312-3426976

ico06
手机

13932271419

ico05
QQ

632469545

ico03
邮箱

632469545@qq.com

ico02
地址

河北安国市石佛镇路景工业园区景旺路8号

 
<
线

商盟客服 >
您好,欢迎莅临我们的网站,欢迎咨询...

  • 徐经理: 点击这里给我发消息