The daily protection of the slurry pump is very important. If the slurry pump is well protected, it will reduce many production costs and effectively extend the service life of the slurry pump. When the slurry pump is working, the pump needs to be placed on the ground, and the suction pipe is placed in the water. Because the situation of slurry pump is relatively bad, it needs to be more careful in application. What should we pay attention to in the application process? Then let the slurry pump manufacturer's editor introduce it to you.
First: before starting, make sure that the steering direction of the pump shaft is consistent with the direction of the arrow on the pump housing
The motor must leave the pump completely during the test run
It is strictly forbidden to drive the pump shaft to reverse rotation by electric thoughts, otherwise the parts will be damaged
Second: pump with packing seal
Packing must be added as required before start-up
Guarantee the supply of shaft seal water for sealing. Do not operate without water
Before start-up, oil shall be added according to the oil level line of the oil standard. It is strictly prohibited to start-up without oil, or the bearing will be destroyed
Third: all fixed continuous parts shall be free of looseness
All safety protection devices of guiding instruments shall be sensitive, accurate and reliable
Fourth: there should be no conflict
Press the rolling direction of the slurry pump by hand to roll the shaft. The shaft shall be able to drive the impeller to roll without any conflict. Otherwise, adjust the impeller clearance.